[OpenOCD-devel] Issues with git latest seeing Digilent-HS2

[Borton, Nick]

Hello,

I have been fighting today to get OpenOCD to recognize a Digilent-HS2 pod so I can perform some kernel debugging.

Here is a piece of the detailed OpenOCD debug output:

Debug: 400 14 ftdi.c:657 ftdi_initialize(): ftdi interface using shortest path jtag state transitions
Error: 401 18 mpsse.c:219 open_matching_device(): no device found
Error: 402 18 mpsse.c:363 mpsse_open(): unable to open ftdi device with vid 0403, pid 6014, description 'Digilent Adept USB Device', serial '*' at bus location '*'
Debug: 403 18 command.c:626 run_command(): Command failed with error code -100
User : 404 18 command.c:687 command_run_line():


dmesg output:

[3733978.431268] usb 1-2.2: USB disconnect, device number 7
[3733982.085675] usb 1-2.2: new high-speed USB device number 8 using ehci-pci
[3733982.183902] usb 1-2.2: New USB device found, idVendor=0403, idProduct=6014
[3733982.183905] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[3733982.183907] usb 1-2.2: Product: Digilent USB Device
[3733982.183909] usb 1-2.2: Manufacturer: Digilent
[3733982.183911] usb 1-2.2: SerialNumber: 210249854389
[3733982.186319] ftdi_sio 1-2.2:1.0: FTDI USB Serial Device converter detected
[3733982.186354] usb 1-2.2: Detected FT232H
[3733982.186862] usb 1-2.2: FTDI USB Serial Device converter now attached to ttyUSB0
[3733982.194015] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[3733982.194036] ftdi_sio 1-2.2:1.0: device disconnected

And lsusb:

Bus 002 Device 073: ID 0403:6011 Future Technology Devices International, Ltd FT4232H Quad HS USB-UART/FIFO IC
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 003: ID 413c:301a Dell Computer Corp.
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 413c:2107 Dell Computer Corp.
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 008: ID 0403:6014 Future Technology Devices International, Ltd FT232H Single HS USB-UART/FIFO IC
Bus 001 Device 002: ID 2109:2812 VIA Labs, Inc. VL812 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

I have also tried installing the Digilent Linux drivers, and that did not help either.

Again, probably something silly.

Any ideas?

Thanks,

Nick

[Andreas Fritiofson]

Post by Borton, Nick
Error: 402 18 mpsse.c:363 mpsse_open(): unable to open ftdi device with
vid 0403, pid 6014, description 'Digilent Adept USB Device', serial '*' at
bus location '*'

Check lsusb -v -d 0403:6014 and look at the product string. Perhaps it
doesn't match the config ("Digilent Adept USB Device")?

[Borton, Nick]

You were correct. On my device the string was “Digilent USB Device” and once I changed the config, I was able to properly connect to the devices on my JTAG chain.

Thanks again,

Nick

From: ***@fritiofson.net [mailto:***@fritiofson.net] On Behalf Of Andreas Fritiofson
Sent: Friday, July 07, 2017 5:12 PM
To: Borton, Nick <***@srcinc.com>
Cc: openocd-***@lists.sourceforge.net
Subject: Re: [OpenOCD-devel] Issues with git latest seeing Digilent-HS2

Notice: This message originated outside of SRC.
On Fri, Jul 7, 2017 at 10:49 PM, Borton, Nick <***@srcinc.com<mailto:***@srcinc.com>> wrote:
Error: 402 18 mpsse.c:363 mpsse_open(): unable to open ftdi device with vid 0403, pid 6014, description 'Digilent Adept USB Device', serial '*' at bus location '*'

Check lsusb -v -d 0403:6014 and look at the product string. Perhaps it doesn't match the config ("Digilent Adept USB Device")?